VW T3 Bus Conversion T4 Brake Disc Rear Axle Brake Caliper Adapter

409,06 €

* Price excl. VAT

  • 2x conversion adapters for VW T3 to T4 brake discs, rear axle
  • Set of matching centering rings
  • high-strength mounting screws
  • 2x wheel hubs
  • material certificate

ETA: 5 - 7 Business days

SKU: E828 Category:

Brake disc adapter on T3 bus model for conversion to T4 brake disc, rear axle.

With these adapters, both T4 brake discs, 280 and 294 , can be mounted with the T4 caliper. Just be careful when buying components: if you want to install, for example, the 280 brake discs, you have to use the original brake calipers and the original brake caliper mounting brackets for the 280 brake discs.

Advantages:

  • top deceleration compared to the undersized original brake system
  • the system no longer warms up and no more fading
  • thanks to the material certificate supplied with the order, it is possible to register your purchase
  • quick and easy assembly with the supplied mounting screws
  • Completely new wheel hubs with wheel bolts included

Required components:

  • Brake discs from VW BUS T4 280×12 mm 15 inch VAG: 7D0 615 601
    •  or for 16 inch 294×13.5 OE numbers: 7D0615601C
  • Brake caliper bracket from VW BUS T4 280×12 mm 15 inch VAG:7D0615425B
    • or for 16 inch OE number: 7D0615425A

    Brake caliper from  VW BUS T4 15 inch OE numbers: 701 615 424

    • or for 16 inch OE number: 701 615 424A
  • it must be checked whether longer wheel bolts may have to be used for the rear wheel hub, when using e.g. wheel spacers or the rim thickness.
  • The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721

Suitable adapters for the front axle also available from us.

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the
  • Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Weight 9 kg

Reviews

There are no reviews yet.

Be the first to review “VW T3 Bus Conversion T4 Brake Disc Rear Axle Brake Caliper Adapter”