Brake caliper adapter W447 Vito V-Class rear axle to 4-piston brake caliper with 360x26mm brake disk

210,94 €

* Price excl. VAT

  • 2x brake calliper adapters for the rear axle of the Mercedes W447 Viano Vito, V-Class
    high-strength screw material
  • material certificate
  • installation instructions (click here)

ETA: 5 - 7 Business days

SKU: E1201 Category:
Brake caliper adapter for the rear axle of the Mercedes W447 Viano on the Mercedes SLS C197 AMG 4-piston Brembo brake calipers in conjunction with the 360×26 brake discs from the Mercedes SLS C197 AMG.
To convert the braking system, the handbrake must be converted to the handbrake shoes from the Mercedes Benz E-Class (W211).
This is not a great effort, as the spreading plates can be taken from the W447 and the brake shoes simply need to be swapped so that the 360×26 brake disc from the Mercedes SLS C197 AMG can be mounted.

The adapters fit the following vehicles:

  • Mercedes W447 Vito

Advantages of this braking system:

  • Extreme deceleration values, even in conjunction with our front axle brake system
  • Top deceleration values, no comparison to conventional rear brake discs
  • The material certificate included in the delivery allows registration by individual acceptance even for series vehicles
  • Directly suitable for the above-mentioned models and can therefore be easily restored to the original condition at any time
  • Our EPYTEC brake calliper adapters do not require you to send in your series parts, nor do they need to be re-welded, re-milled or re-drilled.
  • The original handbrake cable can continue to be used and does not need to be shortened

Required components:

  • Mercedes SLS C197 AMG 4-piston Brembo brake calipers, part number: A1974232798 / A1974232898;
  • Brembo number: 20.A748.04
  • Brake pads, part number: A0074207220, A0064200820, 0054206420
  • Brake discs from the Mercedes Benz GL – Class 360x26mm part number: A1974230112, 1974230112,
  • Brembo part number: 09.A907.11
  • Handbrake shoes from the Mercedes Benz E-Class (W211) part number: 2304200312, 2304200320

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalized answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers.>> Go directly to customized wheel spacers <<
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
  • The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Weight 3 kg

Reviews

There are no reviews yet.

Be the first to review “Brake caliper adapter W447 Vito V-Class rear axle to 4-piston brake caliper with 360x26mm brake disk”