Audi S4 A4 B5 Quattro Rear Axle Brake Caliper Adapter for Cayenne 4-Piston Calipers with 330x22mm Brake Disc – Tuning Adapter

315,87 €

* Price excl. VAT

  • 2x brake caliper adapters for Porsche Cayenne caliper
  • 2x brake caliper adaper to adapt the hand brake caliper
  • high strength mounting screws
  • material certificate
  • Stress analysis

ETA: 5 - 7 Business days

SKU: E973 Category:

Brake caliper adapter, rear axle, on models Audi S4 A4 B5 for conversion to the Porsche Cayenne brake calipers.

Combined with the 330×22 mm brake discs from Audi A6, rear.

The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S4 B5 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.

Suitable for the following VW und Seat models (4WD):

  • Audi A4 B5
  • Audi S4 B5

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • perfectly matches our brake caliper adapter for the front axle
  • must have for better performance
  • supplied material certificate

Required components:

  • Handbrake caliper original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 424 C, 8D0 615 423 C
  • Brake caliper carrier original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 405 S
  • Brake calipers from the Porsche Cayenne from the rear axle part number: (stands on the rear number on the brake calipers, distinguishes right and left calipers) 955.352.421 + 955.352.422 (only 100% suitable with the specified Porsche calipers) Brembo NR:20.7673.03
  • Rear brake disc 330×22 from the Audi A6 part number: 562507JC

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
  • The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Weight 4 kg

Reviews

There are no reviews yet.

Be the first to review “Audi S4 A4 B5 Quattro Rear Axle Brake Caliper Adapter for Cayenne 4-Piston Calipers with 330x22mm Brake Disc – Tuning Adapter”