Audi A8 4D rear axle Cayenne 4 piston brake caliper brake caliper adapter 330×22 brake disk tuning adapter

348,48 €

* Price excl. VAT

  • 2x brake caliper adapter for Porsche Cayenne caliper
  • 2x brake calliper adapter for handbrake calliper adaptation
  • high-strength fastening screw material
  • Material certificate

ETA: 5 - 7 Business days

SKU: E1225 Category:

Brake caliper adapter to convert the rear axle of all Audi A8 4D etc. to Porsche Cayenne brakes.

The combination is used in conjunction with the 330×22 mm brake discs from the Audi A6 rear.

The Porsche calipers are connected to the vehicle’s hydraulics and can therefore develop enormous braking power. However, since these do not have a handbrake function, the original Audi S4 B5 caliper is also used as a handbrake caliper adapter. The hydraulic connection is closed with a blind plug. This means that it only serves as a handbrake caliper.

Adapters are suitable for the following VW and Seat models (all-wheel drive):

  • Audi A8 4D

Advantages of this braking system:

  • Top deceleration values, no comparison to conventional rear brake discs
  • Perfect match for our brake calliper adapter for the front axle
  • A must for performance improvement
  • Material certificate is included

Required components:

  • Handbrake calliper original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 424 C, 8D0 615 423 C
  • Brake caliper carrier original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 405 S
  • Brake calipers from the Porsche Cayenne from the rear axle Part No: (rear number distinguishes right and left caliper) 955.352.421 + 955.352.422 (Only 100% compatible with the specified Porsche calipers) Brembo No: 20.7673.03
  • Brake disc 330×22 rear from Audi A6 Part number: 562507JC

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalized answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers.>> Go directly to customized wheel spacers <<
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
  • The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Weight 3 kg

Reviews

There are no reviews yet.

Be the first to review “Audi A8 4D rear axle Cayenne 4 piston brake caliper brake caliper adapter 330×22 brake disk tuning adapter”